Ethernet Radio Distributed I/O System Module: up to 8 4-20mA or Discrete Industrial I/O points over Ethernet - Interface with Radio or Plant Network

Model DIN-IOE (-1, -2, -3, -4, -5 versions)

The Ethernet Radio Distributed I/O System can be used to build out distributed industrial I/O points (precision 4-20 mA, discrete, relay) across a facility or region linked by Synetcom's PLC Ethernet Radio product.  One radio is required per site and connects to the I/O System using the radio's Ethernet port.  Multiple I/O System modules can be built out from a single radio using a standard hub.  Distributed I/O is easy with multiple radios and systems at many locations.

Ethernet Distributed I/O System modules are available with several standard I/O types and counts.  They are each configured with an IP address and matched to other I/O System modules located anywhere on the network with a destination IP address setting, configured using the browser interface.  No other configuration is needed.

This approach lets you start with a small system and add additional I/O points and remote sites without disrupting system operation.