|
|
|
|
2.4 GHz Ethernet PLC Radios - Industrial Wireless Ethernet bridges link SCADA network equipment up to 35 miles away |
|
|
|
|
|
|
|
|
|
|
|
Page 1 of
2
View Specs
|
|
Industrial Wireless Ethernet PLC Radio - 2.4 GHz FHSS Wireless Ethernet Radio Modem System
Models: WISE-B (440 KB/s),
WISE-BF (1.23 MB/s)
Approvals:
Class 1, Division 2, Groups A,B,C,D Class
1, Zone 2, Group IIC
Extend Ethernet
connections to PLC locations not serviced by your
company network with Synetcom's PLC Ethernet
Radio products. Connect PLC, RTU, Wireless I/O,
data
acquisition and remote control equipment with
the WISE-B PLC Ethernet Radio - build reliable long distance, license
free wireless industrial SCADA systems.
For SCADA
applications with difficult radio paths, see our
lower cost
new
900 MHz Wireless Ethernet
PLC Radio. High
data throughput at 900 MHz and 2.4 GHz is now
possible over long distances, even with
obstructions!
|
- 2.4 GHz Frequency Hopping Spread
Spectrum FHSS PLC radio
- Wireless networking of PLCs
- Wireless networking of industrial data
acquisition and remote control equipment
- Radio is IP addressable
- Wireless Ethernet bridge between PLC, RTU, sensors, controllers
and HMI computers
- Long Range - up to 35 miles with 20
dB fade margin - high throughput sustained
- License free worldwide
- Advanced ARQ, CRC error control,
hopping algorithm
- Excellent immunity to interference and
multipath fading
- Unaffected by nearby cell phones and
2-way radios
- Ethernet Radio repeaters for >35 miles
- Rugged packaging for industrial use
- 14GA metal enclosure
- -30°C to + 70°C
- Mature design - field proven
|
2.4 GHz Industrial Wireless Ethernet PLC Radio
|
|
Synetcom's 2.4 GHz Industrial
Wireless Ethernet PLC Radio is a rugged, field-proven long range 2.4
GHz radio that connects PLC, RTU, I/O and other SCADA equipment.
The radio is designed to provide high speed wireless
connectivity between PLCs and PLC networks - without
compromising reliability and performance. Typical
uses include Ethernet bridging, SCADA device
networking,
PLC networking and industrial wireless data acquisition and control.
The product can function as a high
speed bridge between two Ethernet networks, or
it can provide wireless networking between an
HMI computer + master PLC and multiple remote
slave PLCs. Complex data acquisition and
control systems can be built
using repeaters to extend range and coverage.
Why doesn't the radio transmit
at 10 MB/s? Industrial Ethernet
applications often demand long range and high
reliability which is obtained only by operating
the link more slowly - a limitation of physics,
not the radio design.
For example, faster commodity
802.11 Ethernet bridges or routers offer a higher
throughout but only over short distances (1-2 miles
under ideal conditions)
with the same reliability our radios deliver at
35 miles.
|
Applications
- Wireless Networking of PLCs
- Industrial Wireless Ethernet SCADA
systems
- Wireless PLC Data Acquisition
- Wireless PLC Remote Control
- Long Distance Wireless PLC Ethernet Links |
Transmission
Range: Synetcom specifies a
35-mile range (PLC Ethernet Radio) that includes
a 20 dB margin (if the signal fades as much as
20 dB - a factor of 1/100 - the link
continues to operate).
Obstructions in the line of sight path
reduces range, depending on the type of
obstruction. Contact our factory for
assistance. |
|
|
|
|
|
|